Shopping Cart
There are no more items in your cart
Designed for pruning, the NAJA branch saver allows you to install a work rope while protecting the tree. It has an adjustable strap with four positions to adapt to different branch diameters. Climbing up the rope and moving around the tree are optimised thanks to the high-performance pulley that facilitates the movement of the rope at the anchor. The system is easily retrieved from the ground thanks to the included recovery ball.
Description
- Adjustable branch saver that allows you to install the work rope while protecting the tree:
- Adjustable strap with four different positions to adapt to different branch diameters.
- Specific design that allows you to protect the tree.
- Product supplied with a highly visible yellow strap with a length of 1.5 m. The sling can be replaced or connected to another 1.5 or 2.5 m sling to lengthen the branch saver and allow work on large trees.
- Easy installation of the rope, with snap hook on the MINO auxiliary carabiner for recovery.
- Use with double rope (DdRT/MRS) is preferred. The system can also be used with single rope (SRT/SRS). (1)
- Optimized performance:
- Optimized rope flow at the anchor thanks to the integrated high-performance pulley.
- Can be used by two people for a rescue.
- Easy retrieval system from the ground:
- 21 mm black retrieval ball, specifically designed for the NAJA tree saver, to facilitate retrieval from the ground.
- Retrieval with the retrieval ball, once the rope leaves the pulley, by embedding it in the MINO auxiliary carabiner.
- Strap and buckle narrow enough to reduce the risk of the tree saver getting caught in the tree.
- The NAJA tree saver allows work within the framework of the ANSI Z133 standard.
Characteristics
- Breaking load: 25 kN
- Maximum authorized load: 250 kg
- Certifications: CE EN 795 B, CE EN 12278, UKCA, TS 16415
- Materials: aluminum, stainless steel, polyamide and polyester
- Weight: 400 g
- Min. rope diameter: 11 mm
- Rope diameter max.: 13 mm
- Sheave type: sealed ball bearing
- Sheave diameter: 18 mm
- Efficiency: 91%