Shopping Cart
There are no more items in your cart
Self-braking descender I'D S Evac from Petzl intended mainly for evacuations from an anchorage. It is provided with an ergonomic handle that allows you to comfortably control the descent. The integrated anti-panic function and the error indicator cam limit the risk of accidents in case of misuse.
The Auto-Lock system allows easy positioning at the workplace , without having to manipulate the handle or use a locking key. Once locked, the rope can be retrieved without having to manipulate the handle.
Features:
The Auto-Lock system allows easy positioning at the workplace , without having to manipulate the handle or use a locking key. Once locked, the rope can be retrieved without having to manipulate the handle.
Features:
- Materials: aluminum, steel and polyamide.
- Designed for evacuations from anchorage.
- It has a locking trigger on the mobile side plate that allows the rope to be easily installed and at the same time keep the device connected to the harness.
- Cam error indicator.
- Compatibility with ropes from 10 to 11.5 mm in diameter.
- Stainless steel protective reinforcement in the rope friction area.
- Additional open brake to increase braking depending on the load and diameter of the rope.
- Auto-Lock system that allows easy positioning in the workplace, without having to manipulate the handle or perform a locking key.
- Two possible descent modes: on the side plate or in the V-braking groove.
- Anti-panic function that automatically stops the descent.
- Maximum use load: 250 kg.
- Approximate weight of 615 g.
- Maximum load for one person: up to 150 kg (more information in the technical sheet and in the technical advice at www.petzl.com).
- Maximum load for two people (rescue): up to 250 kg (more information in the technical sheet and technical advice at www.petzl.com).
- Warranty: 3 years.
- Certifications: EN 341 type 2 class A, CE EN 12841 type C, ANSI Z359.4, NFPA 1983 Technical Use and EAC - EN 341 type 2 class A used with a PARALLEL 10.5 mm or AXIS 11 mm rope. - EN 12841 type C used with an EN 1891 A rope from 10 to 11.5 mm. - ANSI Z359.4 used with 10 to 11.5 mm rope. - NFPA 1983 Technical Use used with 10 to 11.5 mm rope.