Multifunction blocker with pulley for rope work and rescue. Robust, functional and intuitive and can be used in four different modes: ascents, pulley, blocker/pulley or rescue pulley.

• Its versatility, its compact size and its simplicity in use allow time, material and space to be reduced to a minimum during maneuvers.
• Allows ascent on a rope in accordance with standard EN 567 / EN 12841-B (ascent mode).
• It can be used as a simple pulley to lift or move a load as indicated in the EN 12278 standard (pulley mode).
• The integrated pulley with ball bearings can be used as a reference for a rope-assisted ascent or to lift a person without the aid of added connectors (blocking/pulley mode).
• It allows you to directly recover a load, create hoists and lift or self-lift a person (pulley mode for rescue).
• In pulley mode, the rope must slide freely in both directions, while in rescue pulley mode the rope slides in one direction and is blocked when pulled in the opposite direction.
• In rescue pulley mode it is possible to unhook the recovered load by maneuvering its dedicated cord hooked to the device's cam.
• The ergonomic opening via a push button allows quick installation on the rope in the selected mode even using gloves or in adverse conditions.
• Equipped with a steel toothed cam that protects the rope from wear and tear and effectively maintains the lock on it. The cam has two grooves to reduce the accumulation of mud and maintain the lock on the rope effectively in any condition (muddy rope, icy rope, etc.).
• Approximate weight of 150 g.

Attention! This product is not a fall arrest device (EN 353-2 / EN 12841-A) nor can it be used for self-belay in climbing.